Metal structural components made to your drawing - DIN rail connectors, pipe clamps, angle brackets and mounting brackets

PROTEC Sp. z o.o. manufactures metal structural and installation components - connectors for 35 mm DIN rail and Al-Cu connectors, pipe clamps, mounting angle brackets, brackets and fasteners - in steel, stainless steel, aluminium and copper, to the customer's technical documentation. Production from prototype to series takes place at our plant in Chróścice near Opole, under ISO 9001:2015 and VDA 6.3 (category A supplier), with TÜV Rheinland certificates.

We run OEM production of structural components to your 2D drawing or 3D model - dimensions and tolerances as specified, also on customer-supplied material, with a measurement report on request. Send your enquiry with drawings or write to sprzedaz@protec.pl.

Product groups

  • DIN rail and electrical connectors - screw, clamp and angle connectors for 35 mm DIN rail, including aluminium-copper (Al-Cu) connectors.
  • Clamps for pipes and profiles - round, square and rectangular, with vibration-damping rubber insert, quick-clamp or stainless steel versions.
  • Mounting systems - elements for fixing cable trays, pipes and equipment, assembled with bolts, without welding on site.
  • Mounting angle brackets - standard, perforated, adjustable, 45 degree and with foot, in steel, aluminium and stainless steel.
  • Mounting brackets - single and double, cross-section, face plate and hole pattern matched to your fixing system. Bending is covered in detail on the CNC sheet metal bending page.
  • Connectors and accessories - rail, bolted and tube connectors for modular extension of structures.
  • Mounting sets - bracket, clamps, angle brackets and connectors supplied as one set to your specification, with marking and packaging under the customer's brand.
  • Bent steel profiles - CNC press brake bending, length up to 3000 mm, thickness up to 15 mm, with laser-cut holes.

Technologies and materials

Technologies Stamping on presses up to 450 t, laser cutting of steel up to 20 mm, CNC bending up to 15 mm and 3000 mm length, robotic MIG/MAG welding, spot welding of steel sheet 0.15-1.0 mm
Materials Black steel, galvanised steel, stainless steel, aluminium, copper; also customer-supplied material
Protection Hot-dip or electroplated zinc coating (EN ISO 1461 for hot-dip) carried out with proven galvanising partners, RAL powder coating, stainless steel passivation or raw finish
Documentation 2D drawing (PDF, DWG, DXF) or 3D model; measurement report on request
Order size Prototypes, small orders, series and repeat orders; assembly of mounting sets
Certificates ISO 9001:2015, ISO 14001:2015, EN 1090-2, EN ISO 3834-2, VDA 6.3 (category A); issued by TÜV Rheinland

Related: custom metal fabrication and contact.

Frequently asked questions - metal structural components

What structural components does PROTEC manufacture?

DIN rail (35 mm) and Al-Cu connectors, pipe clamps, mounting angle brackets, single and double brackets, connectors and bent profiles - all made to the customer's documentation, from prototype to series.

Does PROTEC manufacture to the customer's drawing?

Yes. We work from a 2D drawing (PDF, DWG, DXF) or a 3D model, with dimensions and tolerances as specified, also on customer-supplied material. A measurement report is available on request.

Does PROTEC make pipe clamps?

Yes - for round, square and rectangular pipes, also with vibration-damping rubber insert, quick-clamp or in stainless steel. Dimensions and surface protection follow your drawing.

Does PROTEC supply complete mounting sets?

Yes. Bracket, clamps, angle brackets and connectors are assembled into sets to your specification at our assembly hall in Chróścice and can be marked and packed under your brand.

Which standards and certificates cover production?

ISO 9001:2015, ISO 14001:2015, EN 1090-2 and EN ISO 3834-2, plus category A supplier status under VDA 6.3. Certificates are issued by TÜV Rheinland.

How do you protect components against corrosion?

We choose protection to the operating conditions: hot-dip or electroplated zinc coating carried out with proven galvanising partners, RAL powder coating, stainless steel passivation, or raw delivery when the customer protects the parts themselves.

How is the lead time for an OEM order set?

Lead time for prototypes and series is agreed individually after analysis of the technical drawing - it depends on material, tooling and series size. Send your enquiry with documentation to sprzedaz@protec.pl.