Heat Treatment of Metals at PROTEC ensures durable, dimensionally stable and wear-resistant steel components through precision-controlled heat treatment cycles tailored to project requirements. Our industrial heat treatment services combine advanced furnace control with expertise in hardening and tempering steel for long-lasting performance.
Steel heat treatment
Hardening and tempering in our own chamber furnace
Heat treatment at PROTEC covers only hardening and tempering of steel. We set the parameters to the steel grade and the hardness given on the customer's drawing, and both stages run in the same furnace, one after the other.
100-1260 °C
Temperature range of the chamber hardening furnace.
350 × 500 × 300 mm
Dimensions of the chamber in which we harden and temper parts.
Oil quench tank
Cooling of parts when hardening steel.
Per customer drawing
A stage of our own production orders; hardness is taken from the drawing.
Hardening
Gives steel its hardness. Parts are heated in the chamber furnace and cooled in the oil quench tank.
Tempering
Removes brittleness and hardening stresses, and the tempering temperature is set according to the required hardness. Hardening followed by high tempering is quenching and tempering (heat refining) of steel.
CNC machining after the cycle
Hardening may cause slight distortion, so for tight tolerances we run CNC machining after hardening and tempering, within the same order.
The whole process in one order
Hardening is one stage of a finished part
We carry out the other operations before and after hardening, so the part comes back to you ready.
Laser cutting
Mazak 4 kW laser, sheets 1500 × 3000 mm, steel up to 20 mm.
Metal stamping
Hydraulic presses up to 450 t and mechanical presses up to 400 t, dies from our own tool shop.
CNC machining
Dimensional finishing of parts after heat treatment.
Surface treatment
Shot blasting, vibratory finishing, phosphating and protective coatings.
How an order works
An order with heat treatment at PROTEC applies to parts that PROTEC produces to the customer's drawing - PROTEC does not harden customer-supplied parts as a separate service.
- Customer drawing - steel grade, required hardness and quantity,
- Quotation - selection of production processes and heat treatment parameters,
- Production - making the part, hardening and tempering, further machining and packaging,
- Series and small orders - prototypes and series production; lead time agreed individually, worldwide delivery.
TÜV Rheinland certificates: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, EN 1090-2, EN ISO 3834-2, VDA 6.3.
Frequently asked questions
Heat treatment - frequently asked questions
What heat treatment processes does PROTEC perform?
PROTEC performs hardening and tempering of steel in its own chamber hardening furnace (100-1260 °C, chamber 350 × 500 × 300 mm). PROTEC does not perform annealing, normalizing or heat treatment of aluminium.
What is heat treatment and what are its types?
Heat treatment is heating, soaking and cooling metal according to set parameters, which changes its structure, hardness and ductility. The basic types are hardening, tempering, quenching and tempering (heat refining), annealing, normalizing and thermochemical treatment (e.g. carburizing and nitriding). Of these, PROTEC performs hardening and tempering of steel.
Does PROTEC offer induction hardening of steel?
No. PROTEC hardens steel only in a chamber furnace and tempers it afterwards in the same furnace.
Does PROTEC heat treat aluminium?
No. Heat treatment at PROTEC applies only to steel (hardening and tempering in a chamber furnace). We machine aluminium mechanically, including on CNC machines.
Does PROTEC perform thermochemical treatment, such as carburizing or nitriding?
No. The scope of heat treatment at PROTEC is hardening and tempering of steel in our own chamber furnace - we do not perform carburizing, nitriding or other thermochemical treatment.
Which parts does PROTEC harden and temper?
Hardening and tempering applies to steel parts that PROTEC produces itself to the customer's drawing - laser cut, stamped, bent or CNC machined. State the required steel grade and hardness on the drawing, and we will prepare the calculation based on it.
Which steels are suitable for hardening and tempering?
Hardenability depends on carbon and alloy content - we harden structural steels for quenching and tempering and tool steels, including for tools from our own tool shop (blanking dies and stamping dies). Low-carbon steels cannot be through-hardened. State the steel grade and required hardness on the drawing - we will prepare the calculation based on it.
Does PROTEC harden customer-supplied parts?
No. PROTEC performs hardening and tempering of steel only as a stage of its own production orders - for parts it produces itself to the customer's drawing, e.g. laser cut, stamped or CNC machined.
Why does PROTEC temper steel after hardening?
Steel after hardening is hard but brittle and carries internal stresses. Tempering done directly after hardening in the same furnace reduces brittleness and sets the hardness required on the drawing.
What is quenching and tempering (heat refining) of steel?
Quenching and tempering is hardening combined with high tempering, which gives a favourable combination of strength and ductility. We perform both stages in the same chamber furnace and select the tempering temperature for the hardness required on the drawing.
Does heat treatment change the dimensions of a part?
Hardening may cause slight distortion of the part. For parts with tight tolerances PROTEC can carry out CNC machining after hardening and tempering, within the same order.
How do I order hardened and tempered parts from PROTEC?
Send a drawing with the steel grade, required hardness and quantity to sprzedaz@protec.pl. PROTEC handles prototypes and series production, lead time is agreed individually, and worldwide delivery is possible. Full offer: metalworking.
Request for quotation
Send a drawing with the steel grade and required hardness
The calculation is prepared based on the drawing, material and series size. Lead time agreed individually, worldwide delivery.
sprzedaz@protec.pl | tel. +48 77 427 81 00