Metal Rainwater Splitter for Downpipes Ø76-120 mm

Metal downpipe tee that sends part of the rainwater flow to a water butt or retention tank while the rest continues to the drain. Outlets Ø76, Ø80, Ø87, Ø100 and Ø120 mm – galvanised steel, copper or titanium-zinc.

Description

A metal rainwater splitter is a tee fitted to a round downpipe that diverts part of the rainwater flow to a retention tank, water butt or soakaway, while the main flow continues to the drain without interruption. PROTEC manufactures rainwater splitters in galvanised steel, copper and titanium-zinc for downpipes Ø76 to Ø120 mm.

Rainwater splitter - technical data

Parameter Value
Downpipe outlet (round) Ø76 / Ø80 / Ø87 / Ø100 / Ø120 mm
Connections 3 - inlet from downpipe, side outlet to tank, bottom outlet to drain
Standard material Galvanised steel - 30-50 years service life
Materials to order Copper (over 100 years), titanium-zinc (70-100 years), RAL-coated steel
Typical fitting height 80-120 cm above ground, at tank level

How does a downpipe rainwater splitter work?

Three connections, no valves - water enters from the upper downpipe, part of it leaves through the side outlet to the tank, and the rest flows down through the bottom outlet to the drain or a green area. When the tank is full, water simply continues through the bottom outlet - no manual switching is needed.

Why choose a metal splitter instead of plastic?

  • Temperature resistance - PVC and ABS splitters become brittle after a few seasons of temperature swings from -20°C to +60°C on a dark, sun-exposed downpipe; metal splitters do not.
  • Service life matched to the system - galvanised steel 30-50 years, titanium-zinc 70-100 years, copper over 100 years.
  • One material across the installation - a splitter in the same metal as the copper or titanium-zinc gutter system keeps the installation uniform and removes the risk of galvanic corrosion at the joint.
  • Splitter or diverter - a rainwater diverter sends the whole flow to the tank through a flap; a splitter sends only part of it and keeps continuous discharge to the drain, which suits underground retention tanks and large roof areas.

Serial production to your documentation

Made to drawing or STEP model - PROTEC produces rainwater splitters in series in galvanised steel, copper, titanium-zinc and RAL coating, to the customer's technical drawing or 3D model, also from customer-supplied material. Serial and one-off orders are accepted. Quality management certified by TÜV Rheinland to ISO 9001:2015 and ISO 14001:2015. Send an enquiry with diameter, material and quantity.

FAQ - rainwater splitter

What is the difference between a rainwater splitter and a rainwater diverter?

A diverter sends the whole flow to the tank through a flap and returns the overflow to the downpipe when the tank is full. A splitter is a tee that sends part of the flow to the tank and the rest to the drain at the same time, without a flap. A splitter is used where continuous discharge to the drain is required or with underground retention tanks.

What happens when the rainwater tank is full?

When the tank reaches its maximum level, water stops entering through the side outlet and flows on through the bottom outlet of the splitter to the drain or a green area. No valves need to be switched and no hose needs to be disconnected.

Which splitter material suits a titanium-zinc gutter system?

Use a titanium-zinc or galvanised steel splitter - both metals are electrochemically close and the connection is safe. A copper splitter must not be used in a titanium-zinc system, because copper ions accelerate corrosion of titanium-zinc.