AUTOMOTIVE · TIER 2 SUPPLIER · POLAND

Automotive Metal Stamping Supplier in Poland - VDA 6.3 Category A

PROTEC Sp. z o.o. is an automotive metal stamping supplier in Chróścice, Poland, classified as a VDA 6.3 category A supplier. We stamp, bend and machine steel, stainless steel and aluminium components and weld steel and stainless steel assemblies to the drawings of Tier 1 and Tier 2 customers - with dies made in our own toolroom and production on presses up to 450 t. Prototypes, small batches and long series, worldwide delivery, certified ISO 9001, ISO 14001, ISO 45001, EN ISO 3834-2 and EN 1090-2. Quotes: sprzedaz@protec.pl.

Request Automotive QuoteQuality Certificates

AUTOMOTIVE CERTIFICATIONS

VDA 6.3 - category A supplier
ISO 9001:2015 - quality management
ISO 14001:2015 - environment
ISO 45001:2018 - health and safety
EN ISO 3834-2 - welding quality
EN 1090-2 - EXC2 steel structures
Issued by TÜV Rheinland

What does PROTEC supply to the automotive industry?

PROTEC works build-to-print: stamped, bent, welded and CNC machined metal components are produced to the customer's drawing and specification, from prototypes and small batches to long series. The production system in Chróścice is classified as VDA 6.3 category A - the process audit standard of the German automotive industry (VDA) used to qualify suppliers.

Three things matter for automotive buyers: dies (including progressive dies) are designed and built in PROTEC's own toolroom, so tool changes and new part variants are handled in-house; stamping, laser cutting, bending, welding, machining and heat treatment run in one plant; and German-speaking customers are served by the sales company PROTEC Montagetechnik GmbH in Cologne.

Which processes does PROTEC use for automotive parts?

Automotive components at PROTEC combine stamping on mechanical presses up to 400 t and hydraulic presses up to 450 t, coil-fed stamping lines up to 10 mm, laser cutting of steel up to 20 mm on 1500 x 3000 mm sheets, CNC press-brake bending up to 15 mm, robotic MIG/MAG welding, spot and seam welding of thin sheet 0.15-1.0 mm, CNC milling (max. part 1050 x 570 x 510 mm), CNC turning with bar feeder and wire EDM. Planning and order records run in the ERP system abas.

AT A GLANCE

Supplier classification VDA 6.3 category A
Stamping up to 450 t
Dies own toolroom
Laser cutting steel up to 20 mm
CNC bending up to 15 mm, 3000 mm
Welding robotic MIG/MAG, EN ISO 3834-2
CNC milling max. 1050 x 570 x 510 mm

What automotive components does PROTEC manufacture?

STAMPED COMPONENTS

Brackets, clips and structural parts

Stamped brackets, mounting plates, clips, reinforcement parts and structural sub-components in steel, stainless steel and aluminium. Progressive dies built in our own toolroom, presses up to 450 t, coil-fed lines up to 10 mm.

WELDED ASSEMBLIES

Robotic MIG/MAG welded sub-assemblies

Welded assemblies and sub-assemblies produced on robotic MIG/MAG stations under EN ISO 3834-2, plus manual TIG and spot or seam welding of thin sheet 0.15-1.0 mm. Shot blasting and vibratory finishing in-house.

PRECISION MACHINED PARTS

CNC machined components to drawing

CNC milled parts up to 1050 x 570 x 510 mm, CNC turned parts with bar feeder, wire EDM, surface and shaft grinding and heat treatment in our own chamber furnace (100-1260°C). Stamping and machining can be combined for one part.

What does VDA 6.3 category A mean for a supplier?

VDA 6.3 is the process audit standard of the German Association of the Automotive Industry (VDA). It assesses how a supplier plans and runs production - from project management and process development to series production, supplier management and customer care. The result is a classification, and category A is the highest one.

PROTEC is a confirmed VDA 6.3 category A supplier, and its management systems are certified by TÜV Rheinland to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. For a Tier 1 or Tier 2 buyer this means the production processes have already been assessed against automotive requirements; the scope of part approval documentation is agreed for each project at the quotation stage.

SURFACE AND FINISHING

Steelphosphating
Coatingpowder coating RAL
Stainless steelbrushing, pickling, passivation, polishing
Blastingblack and stainless steel
Deburringvibratory finishing
Heat treatmenthardening 100-1260°C

FAQ - automotive metal stamping supplier in Poland

Is PROTEC an approved automotive supplier?

Yes. PROTEC Sp. z o.o. is an automotive metal stamping supplier classified as VDA 6.3 category A. Its management systems are certified by TÜV Rheinland to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018, and welding to EN ISO 3834-2.

What is VDA 6.3 category A?

VDA 6.3 is the process audit standard of the German automotive industry (VDA). It assesses project management, process development, series production, supplier management and customer care. Category A is the highest classification a supplier can receive.

What automotive components does PROTEC manufacture?

PROTEC manufactures stamped brackets, mounting plates, clips, reinforcement parts, structural sub-components and CNC machined parts in steel, stainless steel and aluminium, plus robotic welded assemblies in steel and stainless steel - all built to the customer's drawing.

Does PROTEC build its own stamping dies?

Yes. PROTEC designs and builds stamping dies, including progressive dies, in its own toolroom. New part variants and tool changes are handled in-house without an external tool shop.

What are PROTEC's stamping and machining capabilities?

Mechanical presses up to 400 t, hydraulic presses up to 450 t, coil-fed stamping lines up to 10 mm, laser cutting of steel up to 20 mm, CNC bending up to 15 mm and 3000 mm, robotic MIG/MAG welding, CNC milling up to 1050 x 570 x 510 mm, CNC turning, wire EDM, grinding and heat treatment.

Which surface treatments are available for automotive parts?

Phosphating of steel, powder coating in RAL colours, shot blasting of black and stainless steel, vibratory finishing, and brushing, pickling, passivation or polishing of stainless steel. The treatment is agreed to the customer's specification.

Does PROTEC produce prototypes and small batches?

Yes. PROTEC produces prototypes, small batches and long series to drawing. Lead time is agreed individually for each project, depending on tooling, quantity and finish.

Does PROTEC serve German automotive customers in German?

Yes. German-speaking customers are served by PROTEC Montagetechnik GmbH, the PROTEC sales company in Cologne. Production takes place in PROTEC's plants in Chróścice, Poland.

Does PROTEC support LkSG and CBAM requirements?

Yes. PROTEC supports German customers with information required under the Supply Chain Due Diligence Act (LkSG) and provides CBAM documentation for European customers. Environmental management is certified to ISO 14001:2015.

Can PROTEC supply metal seat components?

PROTEC produces stamped, bent and robotic MIG/MAG welded steel and stainless steel components to the customer's drawing - brackets, mounting plates, reinforcement parts and welded sub-assemblies - which is the process range used for metal parts of seat structures. Send the drawing, material and annual volume to sprzedaz@protec.pl for a feasibility review.

Does PROTEC deliver automotive parts outside Poland?

Yes. PROTEC delivers worldwide with its own fleet and freight forwarding partners. Production takes place in the EU, in Chróścice, Poland; lead time is agreed per order.

Looking for a VDA 6.3 category A stamping supplier?

Send your drawings (PDF, STEP, DXF), material specification and annual volume - our engineers review feasibility and prepare a quotation.

PROTEC Sp. z o.o.

Automotive metal stamping and welding supplier. VDA 6.3 category A, ISO 9001:2015. Chróścice, Poland.

Address

PROTEC Sp. z o.o.

ul. Korfantego 43

46-080 Chróścice, Poland

Connect

T: +48 77 427 81 00

M: sprzedaz@protec.pl